| Quick Connecting Tube Fitting |
Property
1.Simple and smart, kinds of models, so it meets and stringing pipe requirements.
2.Even it installed, plastic pipe can rotate at random.
3.Release ring adopts ellipse design, so removing for it is more convenient.
4.All taper pipe threads paints Teflon leakage-proof rubber, so seal property is good.
5.All TPC type directly connects hexagonal socket hole of grading belt, so it is convenient to install in the narrow.
|
Specification
| Fluid Type |
Air , vacuum |
| Operating Pressure |
0~10.2 kgf/cm2(0~1.0Mpa) |
| Negative Pressure |
-750mmhg(10Torr) |
| Operating Temperature Range |
0~60℃ |
| Tube Material |
PU/Nylon And Polyurethane |
|
Note
1.Install Tube
(1)The cut offside of the tube must be vertical. The outer surface of tube must not be scarred or be ellipse.
(2)When fitting the tube insure that it is inserted fully or leakage may occur.
(3)After fitting, ensure that the tube cannot disengage.
2.Install Fitting
(1)Ensure correct tools are used for fitting. A six - angled screwdriver must be used to lock the body.
(2)When fitting a gyre worm, do not over tighten or fit too loose. This may result in damage or leakage.
(3)The unit can be adjusted by twisting to adapt to the fittings.
3.Strip Fittings
(1)Ensure correct tools are used for fitting. A six - angle screwdriver must be used to strip the body.
(2)Remove scrap and clean before fitting or damage may occur.
Model & Dimension of Fast Insert Connector
① Company Code
② Model Type
③ Tube Outer Diameter
④Thread Type-Size
| Metric Size |
| Code |
4 |
6 |
8 |
10 |
12 |
16 |
| Diameter |
ø4 |
ø6 |
ø8 |
ø10 |
ø12 |
ø16 |
|
| Metric Size |
| Code |
M5 |
M6 |
M8 |
M10 |
M12 |
M12a |
M14 |
M16 |
M20 |
| Size |
M5×0.8 |
M6×1 |
M8×1 |
M10×1 |
M12×1.25 |
M12×1.5 |
M14×1.5 |
M16×1.5 |
M20×1.5 |
| Taper Pipe Thread |
| Code |
01 |
02 |
03 |
04 |
06 |
| Size |
R1/8 |
R1/4 |
R3/8 |
R1/2 |
R3/4 |
|
